MOT : Wall Panel
- Corian Wall
- Stainless Steel (SS 304)
- Glass Panel
- GI / PPGI
- High Pressure Laminate (HPL)
- Vinyl Wall Cladding
Corian® is a solid, non-porous, homogeneous surfacing material composed of ± 1/3 acrylic resin and ± 2/3 natural minerals.
The main mineral is aluminium TriHydrate derived from bauxite.
Stainless Steel (SS )304 Panels should have flame resistance as per BIS.
Wall & Ceiling panel should be Steel PUF Panel should have two independent steel surfaces, freestanding structure, constructed from composite, free standing insulated Steel Wall & Ceiling panels shall be made of Stainless Steel Grade 304 material having thickness not less than 0.6 mm front and back coated steel 0.5 mm thick.
Thickness of panel for wall 50mm and 30-50 mm minimum for ceiling to achieve better thermal Insulation
Operating Room Wall Panels will be of Glass (with Digital Pictures) having minimum 10mm thickness.
Flushed with EGP Walls backed by 12mm thick gypsum board and supporting hardware/sub frame/plates.
Galvanized steel is produced by dipping bare steel in a bath of molten zinc metal.
A protective coating is formed by metallurgical reaction between iron and zinc stainless steel is defined as a steel alloy with a minimum of 11.5 wt% chromium content. Stainless steel does not stain, corrode or rust as easily as ordinary steel (it “stains less”), but it is not stain-proof.
Laminates molded and cured at pressures not lower than 6900 KPa (1000 psi) are defined as High-Pressure Laminates (HPL)
They basically consist of paper and thermosetting synthetic resins, paper comprising more than 60% of the product.
The remaining 30 to 40% consists of cured phenol-formaldehyde resin for the core and melamine-formaldehyde resin for the decorative layer
Anti Static Vinyl Wall Covering with 1.2mm thick having antifungal, antimicrobial properties.
It acts as a buffer against damage from beds, trolleys and indoor motorized vehicles and other transportation systems.
Specially used in hospital and clean room.
Corian Wall
Corian® is a solid, non-porous, homogeneous surfacing material composed of ± 1/3 acrylic resin and ± 2/3 natural minerals.
The main mineral is aluminium TriHydrate derived from bauxite.
Stainless Steel (SS 304)
Stainless Steel (SS )304 Panels should have flame resistance as per BIS.
Wall & Ceiling panel should be Steel PUF Panel should have two independent steel surfaces, freestanding structure, constructed from composite, free standing insulated Steel Wall & Ceiling panels shall be made of Stainless Steel Grade 304 material having thickness not less than 0.6 mm front and back coated steel 0.5 mm thick.
Thickness of panel for wall 50mm and 30-50 mm minimum for ceiling to achieve better thermal Insulation
Glass Panel
Operating Room Wall Panels will be of Glass (with Digital Pictures) having a minimum 10mm thickness.
Flushed with EGP Walls backed by 12mm thick gypsum board and supporting hardware/sub frame/plates.
GI / PPGI
Galvanized steel is produced by dipping bare steel in a bath of molten zinc metal.
A protective coating is formed by metallurgical reaction between iron and zinc stainless steel is defined as a steel alloy with a minimum of 11.5 wt% chromium content. Stainless steel does not stain, corrode or rust as easily as ordinary steel (it “stains less”), but it is not stain-proof.
High Pressure Laminate (HPL)
Laminates molded and cured at pressures not lower than 6900 KPa (1000 psi) are defined as High-Pressure Laminates (HPL)
They basically consist of paper and thermosetting synthetic resins, paper comprising more than 60% of the product.
The remaining 30 to 40% consists of cured phenol-formaldehyde resin for the core and melamine-formaldehyde resin for the decorative layer
Vinyl Wall Cladding
Anti Anti-static vinyl Wall Covering with 1.2mm thick having antifungal, antimicrobial properties.
It acts as a buffer against damage from beds, trolleys and indoor motorized vehicles and other transportation systems.
Specially used in hospitals and clean rooms.